Barco PDS User Manual page 82

4. Operation
Setup Menu
Figure 4-48. Programming EDID Message 2
Figure 4-49. EDID Programming Failed Message
•
asf=`~ÄäÉ=bèì~ä
From the System Menu, select DVI Cable Equal to display the DVI Cable Equalizer
Menu, which enables you to adjust input cable equalization parameters for both DVI inputs
simultaneously, or individually for inputs 5 through 8.
DV I CAB LE EQUA LIZ ER
> Inpu t
Figure 4-50. DVI Cable Equalizer Menu (sample)
68
If the programming is successful, the following message is displayed:
E D I D P r o g D o n e
Conn ect inpu t cables
and reboo t the PC
ES C = Con tinue
At this point, reboot the external computer(s) in order for the
Note
new EDID information to be read, and the new preferred
resolution to become available.
If the EDID programming failed, the following message will be displayed:
E D I D P r o g f a i l e d !
ES C = Con tinue
If this message persists, please contact customer service for technical support.
Type (5 to 8) — This field applies to inputs 5 through 8 only, allowing you to select
between Digital or Analog EDID for these inputs. Please note:
~ When the Input field is set to 5 through 8, the Type field is selectable
between ANALOG or DIGITAL, and the current Type is reflected.
Changing this field triggers the programming process as soon as SEL is
pressed, using the currently shown resolution in the Format field.
~ When ALL is selected in the Input field, the Type field reflects Input 5.
Any triggering of the programming process changes inputs 5 through 8 to
the selected option in this field.
E q u a l i z a t i o n
Set to Def aul t
Set to Ma xi m um
Set to Min i mu m
All
12
PDS • User's Guide