Appendix A: The vtel.ini configuration file
This appendix contains a generic version of the vtel.ini file, the file that is used for
configuring VTel. This file is, for the most part, self-documenting. However, in the following
presentation, additional comments are occasionally inserted.
Note:
Note:
Many options controlled by vtel.ini are either on or off. The following all signify ON
(they are not case sensitive):
T
●
Y
●
yes
●
1
●
on
●
Anything not recognized as one of the above is interpreted to mean OFF, though it is
suggested that you use one of the following to signify OFF:
F
●
N
●
no
●
0
●
off
●
If you have had VTel customized for you by Avaya, your vtel.ini file may
have more entries than are given here. If your file is designed for a specific
switch, it will have fewer entries than are given here. There may also be
some differences in the precise location of particular options.
Issue 2.1 August 2003
105