Add / Delete Keyfob Transmitters - Visonic PowerMax10 User Manual

Fully supervised wireless alarm control system
Table of Contents

Advertisement

C.5 Add / Delete Keyfob Transmitters
Each of the 8 PowerMax10-G2 users may be provided with a portable keyfob transmitter to exercise better,
quicker and safer arming/disarming and other control functions. Each keyfob should be assigned with a serial
No. (1-8) that corresponds to user No. (1-8) and enrolled into the PowerMax10-G2 system.
♦ Here you can add (enroll) the 8 Keyfob transmitters.
1. Before anything else, gather up all keyfob units you intend to enroll and make sure they all have
batteries installed and that they are active (the LED blinks upon pressing any of the buttons).
2. Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
A. To Add (Enroll) a Keyfob
Enter the USER SETTINGS menu and select the [KEYFOBS] option.
When the display reads [ADD/DEL KEYFOBS] press
The display will read [ADD NEW KEYFOB].
Press
. You are now instructed to enroll the keyfob.
I
OK
Press the AUX button on the selected keyfob until the orange LED
begins to blink and then release it. Press the AUX button again until the
LED lights and then release it.
-or-
Enter the 7-digit number that appears on the keyfob sticker and then
press
.
I
OK
The display reads [
was enrolled manually by entering the ID number), a "Happy Tune"
sounds and the display will then change to [
B. To Delete a Keyfob
Repeat step
above.
Click the
press
I
OK
.
The display will read [K01:Keyfob].
Click the
No. you wish to delete, for example, " K06:Keyfob ".
When the keyfob you wish to delete appears on the display, press
4
I
OK
.
The display now reads [<OFF> TO DELETE].
D-302757
3
] (or [
DEVICE ENROLLED
button. When the display reads [DELETE KEYFOB]
2
or
button until the display reads the Keyfob
MENUS AND FUNCTIONS
1
I
OK
.
2
] if the keyfob
ID accepted
].
K01:Keyfob
5
KEYFOBS
ADD NEW KEYFOB
ENROLL NOW or
ENTER ID No
DEVICE ENROLLED
K01:Keyfob
DELETE KEYFOB
K01:Keyfob
K06:Keyfob
<OFF> TO DELETE
1
etc – see
I
OK
I
OK
or
I
OK
23

Advertisement

Table of Contents
loading

Table of Contents