Table of Contents
Advertisement
MENUS AND FUNCTIONS
a) To program or edit the code, use the numerical keypad to enter the 4
digit code (e.g. 5327) at the position of the blinking cursor.
b) When done, press
A "Happy Tune"
The display returns to step
5 6
( ).
For detailed instructions How to select the Setting Options – refer to section B.1 and section B.2.
1
2
a. The display shows the 1
changed the default code 1111, we recommend that you change it now.
b. The box on the right indicates whether the location is already programmed ( ) or if the location is free
( ).
3
a. The display shows the user code currently programmed in this location (e.g. 5327).
b. The cursor blinks on the first digit of the code.
c. If the location is free the display will be blank ( - - - - ).
4
You can move the cursor to the next or previous digit using the (
button erases the digit of the cursor + all digits right of the cursor.
5
The new code is now displayed without the cursor.
6
You can now repeat steps
select other menu options or to quit programming – follow the instructions in section B.3.
22
I
OK
to confirm.
☺
sounds. The display confirms the saved code.
showing "User 4 Code" as programmed
Additional Information (section C.5)
st
User Code (Master User) in the list of 8 User Codes. If you have not yet
-
to program or edit another user code. To end this session and to
user code 4
3 4
/
) buttons. Pressing the
I
OK
327
I
OK
user code 4 5327
☺
Return to
D-302757
Advertisement
Table of Contents
