Table of Contents
Advertisement
C.12 Programming the Scheduler
The PowerMax10-G2 system includes a Home Automation option that enables activation of a PGM output
according to a programmable weekly time schedule.
♦ Here you can schedule for the PGM up to 4 different ON/OFF time activations per any desired day or days
of the week. In addition, you can schedule a "Daily" schedule that applies to every day of the week. It is
recommended to complete the Scheduler table (placed at the end of this section) before programming the
Scheduler.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
A. To Select the Device No.
Enter the USER SETTINGS menu and select the [SCHEDULER] option.
When the display reads [SCHEDULER] press
The display reads [PGM].
Press
I
OK
.
2
B. To Set the Day
a) Click the
you wish to schedule or "Daily", for example, "Tuesday".
b) When the "day" you wish to schedule appears on the display, press
I
OK
to confirm.
C. To Select the Activation No.
a) Click the
activation you wish to schedule, for example, "operation No 3".
b) When the "activation no." you wish to schedule appears on the
display, press
D. To Set the ON (Start) Time
To set or change the operation ON (start) time, follow the instructions in
section C.10 step
When you are satisfied with the setting, press
E. To Set the OFF (Stop) Time
To set or change the operation OFF (stop) time, follow the instructions
in section C.10 step
When you are satisfied with the setting, press
A "Happy Tune"
D-302757
or
button until the display reads the day
3
or
button until the display reads the
I
OK
to confirm.
4
.
5
.
☺
sounds to confirm the saved schedule.
MENUS AND FUNCTIONS
1
I
OK
.
I
OK
to confirm.
to confirm.
I
OK
6
1
etc – see table
SCHEDULER
I
OK
PGM
I
OK
Sunday
or
Tuesday
`
I
OK
operation No 1
or
operation No 3
I
OK
Start- HH:MM
See section C.10 step
I
OK
Stop- HH:MM
See section C.10 step
I
OK
☺
33
Advertisement
Table of Contents
