Users And Codes - Visonic PowerMax10 User Manual

EMERGENCY
PENDANT
TRANSMITTERS
DOOR OR
WINDOW
OPEN/CLOSE
DETECTOR
UNIVERSAL
PERIMETER
PROTECTION
DETECTOR
WIRELESS
SMOKE
DETECTORS
DETECTOR
(UP TO 28 UNITS)
INSTALLED IN
THE PROTECTED TEMPERATURE
DETECTOR
PREMISES
MOTION
DETECTOR
FLOOD
DETECTOR
CO / GAS
DETECTOR
HARD WIRED
DETECTOR
• Access from remote telephones: You may
access the PowerMax10-G2 from a remote
telephone and Arm/Disarm it or receive system
status information.
• Numerical keys serve as function keys: In the
disarmed state, numerical keys are used to control
various system functions. A simple icon on each
key identifies the task of that key.
• Data retrieval: You can obtain status information,
trouble information and review memorized alarm
events visually.
• Looking after elderly, physically handicapped
and infirm individuals: The system can be
programmed to monitor
protected area and send out an alert message if
the person under surveillance remains still for a
predefined period of time (as set by your installer).
• Distress calls: Miniature pushbutton transmitters
dealt out to specific individuals may be used for
sending emergency calls for help.
• Disarming under duress: If a user is forcibly
compelled to disarm the system, he can use a
special code that disarms the system apparently
as usual, but sends a silent alarm to the monitoring
station (see chapter 4).
• System supervision: All wireless peripherals
within the protected site send periodic supervision
D-302757
TELEPHONE
EXCHANGE
LOCAL
COMPUTER
(OPTION)
KEYFOB 2-WAY KEYFOB
TRANSMITTER TRANSMITTER
A COMBINATION OF UP TO 8
Figure 2. Typical System Configuration
activity within the
TEL
SMS
GSM
GPRS INTERNET
WIRELESS
SIREN OR
EXTERNAL
SIREN
(future option)
TEL. LINE
AWAY
UP TO 2
UP TO 8
KEYPAD
WIRELESS
DEVICES
REMOTE
COMMANDERS
messages. If such a message is overdue, the
PowerMax10-G2 displays an 'inactivity' trouble
message. Your installer can disable this feature if
so desired.
• Battery supervision: You do not have to worry
about 'dead' batteries. The PowerMax10-G2
displays a 'Low Battery' message whenever a
battery in a wireless sensor is found to be near the
end of its useful life. When the battery voltage in
the wireless siren is low, a low battery message is
sent to the alarm system. After the low voltage
message delivery, at least 2 siren alarms are
possible before the siren is totally inactive.

Users and Codes

You will need a 4-digit security code to master the
system (code 0000 is not allowed), and you can
authorize 7 other persons to use the system by
providing them with their own security codes.
Moreover, you can obtain up to 8 multi-function
key-ring transmitters that will allow you and other
users to easily control major functions.
If the user has changed the state of the system from
a high security mode to a lower security mode i.e.
from ARM to DISARM, or from ARM to HOME, he
will be prompted to enter the user code thus
bypassing the QUICK ARM option.
INTRODUCTION
CENTRAL
MONITORING
STATION
INTERNET
ROUTER
COMPUTER
PAGER COMPANY
COMPUTER
4 PRIVATE
TELE-
PHONES
PUBLIC
TELEPHONE
EXCHANGE
CENTRAL MONITORING
STATIONS
USER
PAGER
3