Table of Contents
Advertisement
WEEKLY MAINTENANCE
C. To Periodic Test a Device
Press
I
OK
or
Press
or
I
OK
NNN indicates the number of enrolled devices in the control panel that
have not been tested. This number automatically drops one count for
every tested device.
Press
I
OK
. The display alternates between the device number, the
device type (e.g. magnetic contact, keyfob, keypad, etc.), and the device
6
location.
When the device list has ended, the display reads [<OK> TO LEAVE].
D. To Exit the PERIODIC TEST Menu
To
exit
"Periodic
[DEVICES TEST].
Press
, the display reads [<OK> TO END].
Press
I
OK
to exit.
1
Display shown in disarm state when all zones are secured (00:00 or other digits show present time).
If you have not already changed your personal code number, use the default setting – 1111.
2
If the INSTALLER CODE is used to enter the Periodic Test, the devices LED will blink according to the
3
link quality.
4
To skip the SIRENS TEST, press
5
The Periodic test can be performed on a maximum of three sirens including one internal siren.
6
a. Click
to scroll through the list of devices.
b. The device LED blinks continuously 3 seconds after the device is displayed.
38
. The display reads [DEVICES TEST].
. The display now reads [NOT TESTED NNN].
Test",
press
I
OK
Additional Information (Periodic Test)
.
,
the
display
reads
DEVICES TEST
I
OK
NOT ACTIVE NNN
I
OK
Z01 NOT ACTIVE
Z01 CONTACT
FRONT DOOR
<OK> TO LEAVE
DEVICES TEST
<OK> TO END
I
OK
D-302757
Advertisement
Table of Contents
