Table of Contents
Advertisement
MENUS AND FUNCTIONS
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
1
a. The STATUS to the right of the zone number indicates whether the zone is READY, NOT-READY or
2
BYPASSED.
b. In the example on the right the display reads [
3
a. If the zone you selected is "not bypassed", the display prompts you to press [
However, if the zone you selected is already "bypassed", the display prompts you to press [
].
CLEAR
b. To abort and return to step
press
I
OK
The display now prompts you to press [
4
you wish to abort and return to the User Setting menu i.e. step
will read [
<OK> TO S
5
You can now repeat steps
other menu options or to quit programming - follow the instructions in section B.3.
6
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
20
Additional Information (section C.1 – C.3)
press the
<OK> TO RECALL
KIP], then press
I
OK
-
to bypass or clear another zone. To end this session and to select
] alternating with [
Z01: READY
button, the display will read [
] i.e. to repeat the most recent bypass scheme. If
.
Z01: Living Room
<OK> TO BYPASS
<OK> TO S
press the
button, the display
]
.
].
<#> TO
KIP], then
D-302757
Advertisement
Table of Contents
