Operating The Powermax10-G2 System; Security-Related Pushbuttons; Preparing To Arm; Arming 'Away - Visonic PowerMax10 User Manual

2. Operating the PowerMax10-G2 System

Security-Related Pushbuttons

Key Function
Arming when nobody is at home
Arming when people remain at home
Canceling the entry delay upon arming
('AWAY-INSTANT' or 'HOME-INSTANT')
Disarming the system and stopping
alarms

Preparing to Arm

Before arming, make sure that READY is displayed.
This means that all zones are secured and you may
arm the system any way you choose.
When the system is not ready for arming (at least
one zone is open) the display is NOT READY TRBL
(trouble), NOT READY MEM (memory), NOT
READY MSG (message) or NOT READY BYPASS.
If the system is not ready for arming, click
to review the numbers and names of all open zones,
one by one.
It is highly recommended to fix the open zone(s), thus
restoring the system to the state of "ready to arm". If you
do not know how to do this, consult your installer.
IMPORTANT! All arming procedures below are
based on the assumption that quick arming has been
enabled by the installer. If quick arming is disabled,
the PowerMax10-G2 will prompt you to enter your
security code before arming.

Arming 'AWAY'

If the system is READY, proceed as shown:
PRESS
Vacate the premises
ARM indicator lights steadily during the armed
state.
D-302757
OPERATING THE POWERMAX10-G2 SYSTEM
RESULTANT DISPLAY
ARMING AWAY
PLEASE EXIT NOW
↓
(Exit delay)
AWAY

Arming 'HOME'

If all perimeter zones are READY, and quick arming
is allowed, proceed as shown:
PRESS
Move to interior zone
ARM indicator flashes during the armed state.

Switching from 'HOME' to 'AWAY'

Do not disarm the system - just press
response will be the same as in ARMING AWAY above.
Vacate the premises before the exit delay expires.

Switching from 'AWAY' to 'HOME'

Do not disarm the system - simply press
Since this operation reduces the security level, the
PowerMax10-G2 will ask you to key in your master
user code or user code, thus making sure that you
are an authorized user.
PRESS
[Enter code]
Move to interior zone
ARM indicator flashes during the armed state.
If an alarm occurred while the system was armed in
the AWAY mode, the display will respond differently:
PRESS
↓
[Enter code]
Move to interior zone
ARM indicator flashes during the armed state.
RESULTANT DISPLAY
ARMING HOME
↓
(Exit delay)
AWAY HH:MM
RESULTANT DISPLAY
ENTER CODE _ _ _ _
ARMING HOME
↓ (Exit delay) ↓
ARM HOME HH:MM
RESULTANT DISPLAY
ENTER CODE _ _ _ _
ARMING HOME
↓ (Exit delay) ↓
HOME HH:MM
(alternating)
ARM HOME MEMORY
↓
. The
.
7