Fcc Statement - Visonic PowerMax10 User Manual

FCC STATEMENT

The 315 MHz model of this sensor complies with Part
15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This sensor may not cause
harmful interference, and (2) this sensor must accept
any interference that may be received, including
interference that may cause undesired operation.
The digital circuit of this sensor has been tested and
found to comply with the limits for a Class B digital
sensor, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference
installations. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used
instructions, may cause harmful interference to radio
and television reception. However, there is no
guarantee that interference will not occur in a
particular installation. If this sensor does cause such
interference, which can be verified by turning the
sensor off and on, the user is encouraged to
eliminate the interference by one or more of the
following measures:
– Re-orient or re-locate the receiving antenna.
– Increase the distance between the sensor and the
receiver.
– Connect the sensor to an outlet on a circuit different
from the one which supplies power to the receiver.
– Consult the dealer or an experienced radio/TV
technician.
At 315 MHz the product complies with FCC
requirements.
D-302757
in residential
in accordance with
NOTE: THE
RESPONSIBLE
INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT.
MODIFICATIONS COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING! Owner's instruction notice: "Not to be
removed by anyone except occupant".
If the "PowerMax10-G2" causes harm to the
telephone network, the telephone company will notify
you in advance that temporary discontinuance of
service may be required. If advance notice is not
practical, you will be notified as soon as possible.
the
Also, you will be advised of your right to file a
complaint with the FCC if it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with the "PowerMax10-G2"
for repair or warranty information please contact
Visonic Inc USA., 65 West Dudley Town Road,
Bloomfield, CT 06002, phone number: 8 602 430
833, URL: www.visonic.com. If the equipment is
causing harm to the telephone network, the
telephone company may request to disconnect the
equipment until the problem is resolved
MANUFACTURER
FOR ANY RADIO
IS NOT
or TV
SUCH
45