Remote Control Devices - Visonic PowerMax10 User Manual

Remote control devices

Your system responds to signals sent by a 4-button
(KF-234) or a 6-button two-way (KF-237) 'keyfob'
transmitter, or by a two-way wireless keypad (MKP-
150/151) - see figure 4.
Messages are authenticated and encrypted, by using
AES - 128 encryption standard, hence malicious
"code grabbing" is virtually impossible.
Both wireless keyfob transmitters are used to control
the alarm system.
KF-234
DISARM
AWAY
HOME
AUX
MKP-150 /151
D-302757
MOVE BACK
DISARMING
CHIME ON/OFF
EVENT LOG
EMERGENCY
(hold for 2 sec.)
* Not included in all models
Figure 3. Controls and Indicators
KF-237
DISPLAY
DISARM
AWAY STATUS
HOME
AUX B
AUX A
INDICATORS
POWER ARM CHIME
NEXT
PRESS BOTH FOR PANIC ALARM
Figure 4. Keyfob Transmitters and Keypad
A PANIC alarm can be initiated: through the KF-234
keyfob, by pressing AWAY and HOME together for 2
sec.; through the KF-237 keyfob, by pressing the
AUX1 and AUX2 buttons for 2 sec.; and through the
MKP-150/151 keypad by pressing the # and *
buttons for 2 sec. Pressing AWAY twice within 2
seconds initiates Latchkey arming, if enabled by the
installer.
The devices can be used for:
INTRODUCTION
TROUBLE
DISPLAY
SHOW / OK
ARMING "HOME"
ARMING "AWAY"
CANCEL ENTRY
DELAY
PA RT ITIO N
SELECTION*
FIRE (hold
for 2 sec.)
AWAY
5