Redundant System Installation - Altigen MAXCS ACC 6.0 Administration Manual

Chapter 2: System Requirements and Installation
HMCP Media Server—If you have a small to medium scale system (no more than
•
about 200 extensions), you can choose to install Softswitch and HMCP Media Server
in the same machine, if you want to. You can also install them in different machines,
especially if you plan to grow your system.
If your system is larger, install HMCP Media Server and Softswitch on different
servers.
The HMCP Media Server check box is not available if the operating system is not
Windows 2003 SP2. AltiGen supports HMCP Media Server only on servers provided
by AltiGen.
Gateway—Select this option to install gateway service to an AltiGen IP gateway.
•
The supported gateway platforms are:
OFFICE3G server
–
MAX2000iG (gateway-only MAX server with redundant power supply and RAID
–
hard drive)
Do not install gateway service to MAX1000 or MAX1000R server.
Note:
When installing Gateway service to an OFFICE3G server, remove Triton
Resource and MeetMe Conference boards. Softswitch server will not use these
boards as conference/barge-in resources.
If you select Gateway, the next screen requires you to assign an ID to the gateway.
For detailed instructions on installing and upgrading MAXCS, AltiGen Dealers should refer
to "6.0 Upgrade Guidelines" in the Knowledge Base, available from the AltiGen Dealer
Web Site, at https://dealer.altigen.com.

Redundant System Installation

These are the components in a redundant system installation.
To install the primary softswitch or secondary softswitch, select Softswitch and HMCP
Media Server or Softswitch to install. The installation will prompt you to input the IP
address of the VM server and Enterprise Manager.
26
MAXCS ACC 6.0 Administration Manual