Testing Tapi Service Provider On The Client System; Making A Call In Microsoft Outlook - Altigen MAXCS ACC 6.0 Administration Manual

4. In the Line used for section, select the client extension in the Phone calls drop-
down list, and click OK.

Testing TAPI Service Provider on the Client System

To test TAPI Service Provider on the client system:
1. Click the Dial button in the toolbar.
2. Enter a number to call in the Number to Dial box, and click Place Call.
The client extension should ring. When you pick up the phone, the system will dial
the number you entered and connect you (if the extension is configured to dial an
outside number). If this does not work, make sure your previous configurations are
correct.
Reboot the client system after any configuration changes to make sure the
Note:
changes take effect completely.

Making a Call in Microsoft Outlook

Before making a call, configure the Outlook New Call configuration.
Chapter 29: TAPI Integration
MAXCS ACC 6.0 Administration Manual 383