Altigen MAXCS ACC 6.0 Administration Manual page 209

workgroups and hunt groups are shown. If the extension is not an agent, only hunt
groups are shown.
Figure 3. Extension Configuration window, Group tab
Adding or Removing Group Assignments
You can assign an extension to a hunt group in the Huntgroup Configuration window and
to a workgroup in the Workgroup Configuration window. Conversely, you can assign a
hunt group or a workgroup to an extension in the Extension Configuration window.
To assign a group to the selected physical or virtual extension
1. On the Group tab, click the group number in the Not Member list.
2. Click the Add button to move it to the Member list.
If a hunt group or workgroup is configured to Ring All Available Members, the
Note:
maximum number of members is 20. See "Setting Call Handling Options" on
page 250 for details.
To remove a group assigned to a physical or virtual extension
1. Click the group number in the Member list.
2. Click the Remove button. The group moves to the Not Member list.
You can use Shift+click and Ctrl+click to select more than one group.
Note:
Chapter 15: Extension Configuration
MAXCS ACC 6.0 Administration Manual 195