Redundant System Installation - Altigen ACM 6.5 Administration Manual

HMCP Media Server—If you have a small to medium scale system (no more than
•
about 200 extensions), you can choose to install Softswitch and HMCP Media Server
in the same machine, if you want to. You can also install them in different machines,
especially if you plan to grow your system.
If your system is larger, install HMCP Media Server and Softswitch on different
servers.
The HMCP Media Server check box is not available if the operating system is not
Windows 2003 SP2 or Windows 2008. AltiGen supports HMCP Media Server only on
servers provided by AltiGen.
Gateway—Select this option to install gateway service to an AltiGen IP gateway.
•
The supported gateway platforms are:
OFFICE3G server
–
MAX2000iG (gateway-only MAX server with redundant power supply and RAID
–
hard drive)
Do not install gateway service to MAX1000 or MAX1000R server.
Note:
When installing Gateway service to an OFFICE3G server, remove Triton
Resource and MeetMe Conference boards. Softswitch server will not use these
boards as conference/barge-in resources.
If you select Gateway, the next screen requires you to assign an ID to the gateway.
For detailed instructions on installing and upgrading MAXCS, AltiGen Dealers should refer
to "6.5 Upgrade Guidelines" in the Knowledge Base, available from the AltiGen Dealer
Web Site, at https://dealer.altigen.com.

Redundant System Installation

These are the components in a redundant system installation.
"Redundancy Configuration" on page 377 gives details on configuring for redundancy.
However, because of the variations of redundancy setup (depending on your system),
please consult with AltiGen before installing a redundancy system.
System Requirements and Installation
MAXCS ACM 6.5 Administration Manual 29