Opening Enterprise Manager - Altigen MAXCS ACC 6.0 Administration Manual

Opening Enterprise Manager

To open Enterprise Manager, use one of the following methods:
For a single-system installation without a VoIP domain Master, this method is
•
recommended: From MaxAdmin, select VoIP > Enterprise Network
Management. Enterprise Manager opens without a login dialog box.
For multisite VoIP domain management, from the Windows Start menu, select All
•
Programs > MAX Communication Server ACC/ACM > Enterprise Manager. A
login screen appears. (With this method you can log in to the VoIP domain Master
from any member system.)
User name
DomainAdmin
(Logging in as
DomainAdmin gives you
rights to change the entire
Enterprise Manager
configuration.)
Admin@domain master IP
address
(A Site Admin who logs into
the Domain Master in this way
has the same rights as
DomainAdmin.)
Admin@member server IP
address
(A Site Admin who logs in this
way can make changes on this
member server only.)
WARNING!
following warning message when launching Enterprise Manager. Please check the
Internet Protocol (TCP/IP) Properties of your server NIC interface and assign a fixed
IP address to this server.
Chapter 25: Enterprise VoIP Network Management
Password
Default=22222. You can
change the password in
Enterprise Manager:
Note: This password is not
the same as the MaxAdmin
password.
Enter MaxAdmin password
Enter the MaxAdmin
password for the member
server
If your MAXCS system is using dynamic IP addressing, you will see the
Login Domain Via Server
Enter the domain master's IP
address
Enter the domain master's IP
address
Enter the member server's IP
address
MAXCS ACC 6.0 Administration Manual 305