Rejoining A Server To The Voip Domain - Altigen MAXCS ACC 6.0 Administration Manual

Chapter 25: Enterprise VoIP Network Management
After you add a member server to the VoIP domain, an entry is also added to the IP
dialing table and propagated to all members automatically.
In the Global Server Location panel, the status will show "Active" if the VoIP domain
master communicates to the member successfully.
In the event that you need to shut down VoIP domain Master for a period of time, you
can change the Master role to another member system by selecting one of the member
systems and clicking the Set as Master button.

Rejoining a Server to the VoIP Domain

If a slave server crashes, or for some other reason disconnects and never returns by
itself into the domain, you will have to manually rejoin it to the VoIP domain:
1. Rebuild the slave, if necessary.
2. In the VoIP > Multi-Site Domain Configuration window, make sure the slave's
Server Role is Stand-alone and that the domain name is correct.
3. The System ID of this slave should be the same as it was before it became
disconnected from the domain. (This ID is set in MaxAdmin: System > General
tab.)
4. In Enterprise Manager, Global Server Location panel, select the slave and click the
Rejoin button to synchronize the slave with the domain.
324
MAXCS ACC 6.0 Administration Manual