Altigen MAXCS ACC 6.0 Administration Manual page 390

Chapter 28: Microsoft Exchange Integration
7. Click Next to enable unified messaging, and then click Finish.
8. If you selected the Bridged Access Option, disable the "Call the Sender" option in the
Exchange Server. This option is not supported in AltiServ. Exchange administrators
can also disable Exchange users from leaving voice mails and transferring calls.
In the Exchange Management
Console, double-click the
appropriate dial plan, and in
that plan's Default Policy
Properties > Dialing
Restrictions tab, clear the
two check boxes, and click OK.
9. In Enterprise Manager > IP Dialing Table, add an entry and select the protocol
as SIP/TCP. For example:
376
MAXCS ACC 6.0 Administration Manual