Setting Business Hours - Altigen MAXCS ACC 6.0 Administration Manual

Chapter 4: System Configuration
Parameter

Setting Business Hours

The Business Hours tab contains group boxes for setting the business hours and days of
the week for which the business or organization is in operation. The business hours
schedules are used to set other system settings such as trunk, and DNIS and caller ID
in call routing.
Because the business hours are used throughout the system, you or the
Note:
appropriate administrator must make sure the system time has been set
correctly. The system time can be changed using the Date and Time options in
the Windows Control Panel.
To access the Business Hours settings, select System > System Configuration, then
click the Business Hours tab.
Figure 5. System Configuration, Business Hours tab
Multiple Business Hours profiles can be configured in a system. A default "System"
Business Hours profile is already configured. Multiple Business Hours profiles can also
be assigned to DNIS Routing and Trunk In Call Routing entries.
50
MAXCS ACC 6.0 Administration Manual
Description
The Route Access option can be assigned to one or
–
Route Access
more digits, to route the call per the out call routing table. Out call
routing, which is sometimes called ARS (Automatic Route Selection)
or LCR (Least Cost Routing without carrier rate table), is described
in Chapter 14, "Out Call Routing Configuration".
Out call routing is designed to help 10-digit dialing, Zoomerang
dialing, digit manipulation, and tie trunk hop-off dialing.