Promise Technology FASTtrak100 TX User Manual page 94

Your choices are as follows:
Abort: Halts the rebuild process. You may elect to retry at a later date.
Break ECC on Target Drive : If the error is detected on the source drive,
"Break ECC on Targ et Drive" means that FastTrak will copy the bad data
sector on to the target drive to assure that both drives are identical. If the
error is detected on the target drive, FastCheck will copy the data
contained in the good sector of the source drive again to the target drive.
Skip the Error Block : FastTrak100 will log the event error and continue the
rebuild process. Use this setting if you want to detect the presence of
errors, but do not want to fix these errors at the time. You may then
decide what to do about the error(s) detected.
ECC Error Reported on Synchronize
The following screen will appear if a data error is detected on either source or target
drive during Synchronize if you have set the On Errors setting to "Interactive" within
FastCheck's Option s Window for Scheduled Synchronization (see page 64) or for
Manual Synchronization under Notification options (see page 63).
FastTrak100 TX/LP™ Series User Manual
90