Viewing Controller Settings - Promise Technology FASTtrak100 TX User Manual

Viewing Controller Settings

The Controller Configuration <6> menu selection allows you to enable or disable the
FastTrak100 BIOS from halting (the default) if it detects an error on boot up. You may
also view the system resources (Interrupt and I/O port address) of FastTrak's data
channels.
FastBuild (tm) Utility 1.xx (c) 1995-2001 Promise Technology, Inc.
Channel 1 (IDE1)
Channel 2 (IDE2)
Halting FastTrak BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or disable
FastTrak100 to Halt operation at the BIOS startup screen should an error be detected.
This is the only option that can be changed on this screen.
Viewing FastTrak System Resources
The [System Resources Configuration] section of this submenu displays the PCI slot
interrupt and port address used by the FastTrak100. The resources used are
determined by the Mainboard PCI PnP BIOS for the PCI slot in which the FastTrak100
resides.
In the rare case that there is a resource conflict, refer to the Mainboard BIOS
documentation on changes on resources allocated to the FastTrak100 PCI slot.
FastTrak100 TX/LP™ Series User Manual
[ Adapter Configuration - Options ]
Halt On Error:
[ System Resources Configuration ]
Interrupt : A
Interrupt : A
[ Keys Available ]
[ , , Space] Change Option [ESC] Exit
Enable
I/O Port : FFF0
I/O Port : FFA8
35