Promise Technology FASTtrak100 TX User Manual page 80

Creating Password
To create a password, check the Enable Password checkbox in the
1.
Preferences section. The "Set Password" window will appear.
2. Type the password you want to use. Press the Tab key or click to retype the
same password in the "Confirm New Password" section. Click the O K button.
NOTE: Remember to record the password you use in a secure place in case you
forget it.
3. A confirmation screen will appear saying "Password Checking is Enabled". Click
the OK button.
4. Once the password feature is enabled, the following menu will appear before
the FastCheck window can be opened.
Changing Password
1. Input the original password you first created to gain access to FastCheck.
2. Click on Options tab, and then click on the Change button in the Password
section. The Set Password screen will appear (see figure in step 3 above).
3. Type the password you want to use. Press the Tab key or click to retype the
same password in the "Confirm New Password" section.
4. Click OK button.
Disabling Password
1. Input the original password you first created to gain access to FastCheck.
2. Click on Options tab.
FastTrak100 TX/LP™ Series User Manual
76