Table of Contents
Advertisement
Timing: Shows selection of drive timing (directly related to burst speed) based
on type of drive and cable used.
Optional Enclosure Management for SuperSwapTM Drive Chassis
If using your FastTrak100 with an optional Promise Technology SuperSwap
swap drive chassis, the FastCheck controller window will also display voltage, fan,
and drive temperature status of the SuperSwap unit when a drive icon is selected as
follows below :
Encl. Type: Identifies SuperSwap and other compatible enclosure models.
H/W Conf: Indicates which enclosure subsystems are being monitored.
Fan Status: Shows operating status of SuperSwap fan and approximate RPM
rate.
Temp: Shows internal temperature of enclosure in both ° F and ° C.
Voltage 5V : Shows approximate voltage status of 5V power regulator.
Voltage 12V : Shows approximate voltage status of 12V power regulator.
FastTrak100 TX/LP™ Series User Manual
69
T M
hot-
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FASTtrak100 TX and is the answer not in the manual?