Table of Contents
Advertisement
Windows ME
Installing Drivers During Windows ME Installation
The following details the installation of the FastTrak100 drivers while installing
Windows ME (with the FastTrak100 controller card already in place). If you're
installing the FastTrak100 drivers on a system with ME already installed, see
"Installing Drivers with Existing Windows ME System."
NOTE: If you have the FastTrak100 TX4, you will need to go through these steps
twice, since the TX4 appears as 2 controllers to the systems.
1.
Install Windows ME fully.
2.
After installation, go the "Start" menu and choose "Settings."
3.
From the "Settings" menu, choose "Control Panel."
4.
In the "Control Panel" window, double -click on the "System" icon.
5.
In the "System" window, choose the "Device Manager" tab .
6.
In the hierarchical display under "Other Devices" is a listing for "PCI RAID
Controller." Choose it and then press the "Properties" button.
7.
Choose the "Driver" tab in the "Properties" window, choose "Update
Driver," and then press "Next."
8.
Choose "Search for a better driver than the one your device is using now
(recommended)," then press "Next."
9.
Choose "Specify Location," and then type "A: \WIN9x-ME" in the text box.
10. Insert the "FastTrak100 Driver" diskette into the A: drive.
11. Press the "Next" button. A mess age informing you that Windows Millennium
has found "Win9x -ME Promise FastTrak100 TX/LP(tm) Series Controller"
should appear.
12. Press "Next," then "Finish," then "Yes" when asked if you want to restart
your computer. Be sure to remove the diskette from drive A:.
FastTrak100 TX/LP™ Series User Manual
40
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FASTtrak100 TX and is the answer not in the manual?