Promise Technology FASTtrak100 TX User Manual page 51

load c:\SERVER.312\nbi31x
8. Save the file.
9. DOWN and EXIT the server.
10. Remove the NetWare CD-ROM.
11. Reboot the server.
For Existing Netware 3.12 Servers:
8. Copy Fasttrak driver FASTTRAK.HAM & FASTTRAK.DDI into the Netware
3.12 boot directory. Ex. C:\SERVER.312\
9. Edit STARTUP.NCF and add the following lines after any set parameters but
before any file loading:
load c:\SERVER.312\312ptd\native\start\npapatch
load c:\SERVER.312\mmattrfx
load c:\SERVER.312\nbi31x
Also add a subsequent line to "load FASTTRAK" to load the
FASTTRAK.HAM driver.
10. Boot the server
FastTrak100 TX/LP™ Series User Manual
47