Supported Switches; Standards Compliance - HP StorageWorks 4/8 - SAN Switch Release Note

Previously licensed software now part of base Fabric OS
The following capabilities are included as part of the base Fabric OS capability and no additional
purchase or licensing is necessary.
NOTE:
Advanced Zoning and Web Tools licenses are no longer necessary, beginning with Fabric OS 6.1.
These features are automatically enabled on all products running Fabric OS 6.1 or later

Supported switches

The following switches are supported with Fabric OS 6.2.0b:
HP StorageWorks 4/8 and 4/16 SAN Switch
HP StorageWorks 8/8 and 8/24 SAN Switch
Brocade 4Gb SAN Switch for HP p-Class BladeSystem
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
HP StorageWorks EVA4400 Embedded Switch Module
HP StorageWorks 8Gb SAN Switch for HP BladeSystem c-Class
HP StorageWorks SAN Switch 4/32
HP StorageWorks 4/64 SAN Switch
HP StorageWorks SAN Switch 4/32B
HP StorageWorks 8/40 SAN Switch
HP StorageWorks 8/80 SAN Switch
HP StorageWorks Encryption SAN Switch
HP StorageWorks 400 Multi-protocol Router
HP StorageWorks 4/256 SAN Director
HP StorageWorks DC SAN Backbone Director
HP StorageWorks DC04 SAN Director
HP DC Switch Encryption FC Blade
HP StorageWorks 4/256 SAN Director 16 Port 4–Gb Blade
HP StorageWorks 4/256 SAN Director 32 Port 4–Gb Blade
HP StorageWorks 4/256 SAN Director 48 Port 4–Gb Blade
HP StorageWorks Multiprotocol Router Blade
HP StorageWorks B-Series iSCSI Director Blade
HP StorageWorks SAN Director 16 Port 8–Gb FC Blade
HP StorageWorks SAN Director 32 Port 8–Gb FC Blade
HP StorageWorks SAN Director 48 Port 8–Gb FC Blade
HP StorageWorks SAN Director 6 Port 10–Gb FC ISL Blade

Standards compliance

This software conforms to the Fibre Channel Standards in a manner consistent with accepted
engineering practices and procedures. In certain cases, HP might add proprietary supplemental
HP StorageWorks Fabric OS 6.2.0b release notes 7