Show; Start Rdf; Start Update; Status - HP NonStop RDF J-series RVUs Management Manual

where volume-option is:
{ATINDEX atindex
{CPUS primary-CPU : backup-CPU }
{PRIORITY priority-number
{PROCESS
{IMAGEVOLUME volume
{UPDATEVOLUME volume
{INCLUDE subvol.file
{EXCLUDE subvol.file
{INCLUDEPURGE subvol.file
{EXCLUDEPURGE subvol.file
{MAPFILE $vol.subvol.file
{MAPLOG $vol.subvol.file

SHOW

The SHOW command displays the current parameter values contained in the RDF configuration
memory table for the specified process. With this command, you can confirm the parameter
values before issuing the ADD command that actually applies them to the configuration file.
Where Issued: Primary or backup system.
Security: Any user.
SHOW {RDF
{MONITOR
{EXTRACTOR
{RECEIVER
{IMAGETRAIL }
{TRIGGER
{VOLUME
{PURGER
{RDFNET
{NETWORK

START RDF

The START RDF command starts the RDF subsystem.
Where Issued: Primary system only.
Security: Super-user group member with remote password from the primary system to the
backup.
START RDF [,UPDATE {ON | OFF}]

START UPDATE

The START UPDATE command starts all updater processes on the backup system.
Where Issued: Primary system only.
Security: Super-user group member with remote password from the primary system to the
backup.
START UPDATE

STATUS

The STATUS command displays current configuration information and operational statistics for
the RDF environment.
Where Issued: Primary or backup system.
Security: Any user.
STATUS {MONITOR
{RDF
{EXTRACTOR
{RECEIVER
{PURGER
process-name
}
}
}
}
}
}
}
}
}
} [, PERIOD seconds[, COUNT repeat]]
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
RDFCOM Commands Quick Reference 355