Sample Configurations; Sample Network Master Configuration - HP NonStop RDF J-series RVUs Management Manual

It is rare for clocks on different systems to have exactly the same values, thus rendering it
impossible for stop-update-to-time operations to perform correctly across multiple backup
systems.

Sample Configurations

Two sample configurations follow, one for the network master and one for a non network master.
The network attributes are highlighted in bold.

Sample Network Master Configuration

The configuration that follows is for a network master RDF subsystem running from \RDF04 to
\RDF06:
SET RDF SOFTWARELOC $SYSTEM.RDF
SET RDF LOGFILE $0
SET RDF UPDATERDELAY 10
SET RDF UPDATERTXTIME 60
SET RDF UPDATERRTDWARNING 60
SET RDF UPDATEROPEN PROTECTED
SET RDF NETWORK ON
SET RDF NETWORKMASTER ON
SET RDF UPDATEREXCEPTION OFF
ADD RDF
SET MONITOR CPUS 1:2
SET MONITOR PRIORITY 185
SET MONITOR PROCESS $MMON
ADD MONITOR
SET EXTRACTOR ATINDEX 0
SET EXTRACTOR CPUS 1:2
SET EXTRACTOR PRIORITY 185
SET EXTRACTOR PROCESS $MEX1
SET EXTRACTOR RTDWARNING 60
ADD EXTRACTOR
SET RECEIVER ATINDEX 0
SET RECEIVER CPUS 3:2
SET RECEIVER EXTENTS (100,100)
SET RECEIVER PRIORITY 185
SET RECEIVER RDFVOLUME $DATA11
SET RECEIVER FASTUPDATEMODE OFF
SET RECEIVER PROCESS $MR41
ADD RECEIVER
SET PURGER CPUS 3:2
SET PURGER PRIORITY 185
SET PURGER PROCESS $RP40
SET PURGER RETAINCOUNT 5
SET PURGER PURGETIME 60
ADD PURGER
SET IMAGETRAIL ATINDEX 0
ADD IMAGETRAIL $DATA06
SET NETWORK PRIMARYSYSTEM \RDF04
SET NETWORK BACKUPSYSTEM \RDF06
SET NETWORK REMOTECONTROLSUBVOLUME RDF04
SET NETWORK PNETTXVOLUME $DATA07
ADD NETWORK
SET NETWORK PRIMARYSYSTEM \RDF05
SET NETWORK BACKUPSYSTEM \RDF06
Sample Configurations 305