Help For Rdf Error Messages - HP NonStop RDF J-series RVUs Management Manual

{ PURGER
{ RDFNET
{ NETWORK
{ TRIGGER trigger-type
{ VOLUME $volume
{ $volume
Cannot be performed with RDF running.
Only a user in the SUPER group can execute this command.
To obtain a list of the available RDFCOM commands, enter:
]HELP ALL
RDFCOM displays the following information:
Help is available for the following:
Configuration Commands:
ADD
ALTER { RDF | MONITOR | EXTRACTOR | RECEIVER | PURGER |
DELETE
INFO
INITIALIZE
RESET
SHOW
SET { RDF | MONITOR | EXTRACTOR | RECEIVER | IMAGETRAIL |
PURGER | NETWORK | RDFNET | TRIGGER | VOLUME }
Operational Commands:
COPYAUDIT
START
STATUS
STOP
TAKEOVER
UNPINAUDIT
VALIDATE
Utility Commands:
EXIT
FC
HELP
HISTORY
OBEY
OPEN
OUT
RDF Concepts:
Abbreviations
RDF error messages:
error-number
E.g., "help 700"
prints an explanation for the RDF error message 700

Help for RDF Error Messages

For information about a particular error message (its cause, effect, and recommended recovery
steps), enter HELP followed by the message number. For example, to obtain information about
message number 715, enter:
]HELP 715
108 Operating and Monitoring RDF
TRIGGER | RDFNET | VOLUME }
}
}
}
}
}
}