Info Extractor Command; Info Extractor Command With Obeyform Option - HP NonStop RDF J-series RVUs Management Manual

VOLUME CPUS 2:1
VOLUME PRIORITY 160
VOLUME UPDATEVOLUME $DATA1
VOLUME IMAGEVOLUME $SECIT1
VOLUME PROCESS $UP01
VOLUME $DATA02
VOLUME ATINDEX 0
VOLUME CPUS 2:1
VOLUME PRIORITY 160
VOLUME UPDATEVOLUME $DATA2
VOLUME IMAGEVOLUME $SECIT2
VOLUME PROCESS $UP02
VOLUME $DATA03
VOLUME ATINDEX 0
VOLUME CPUS 2:1
VOLUME PRIORITY 160
VOLUME UPDATEVOLUME $DATA3
VOLUME IMAGEVOLUME $SECIT2
VOLUME PROCESS $UP03
TRIGGER PROGRAM $SYSTEM.RDF.RDFCOM
TRIGGER INFILE $DATA01.RDF.RDFCONF
TRIGGER OUTFILE $DATA01.RDF.OUTFILE
TRIGGER CPUS 0:1
TRIGGER PRIORITY 150
TRIGGER NOWAIT
TRIGGER REVERSE
The primary system name is set implicitly and the backup system name is set in the INITIALIZE
RDF command.

INFO EXTRACTOR Command

To display the current configuration parameters for the auxiliary extractor process associated
with auxiliary audit trail AUX02, enter the following command:
]INFO EXTRACTOR ATINDEX 2
The output shows that the auxiliary extractor for AUX02 is configured with its default parameter
values: running in CPUs 2 and 1, with a priority of 165, and with the default RTD warning
threshold of 60 seconds:
EXTRACTOR ATINDEX 2
EXTRACTOR CPUS 2:1
EXTRACTOR PRIORITY 165
EXTRACTOR PROCESS $EXT2
EXTRACTOR RTDWARNING 60

INFO EXTRACTOR Command With OBEYFORM Option

The OBEYFORM option is useful when you want to create an RDF configuration command file
from an existing configuration: for example, for later use in an OBEY command. To copy the
current extractor process configuration parameters in command file format to the output file
named $RDF.EX.COMFL, enter:
]OUT $RDF.EX.COMFL
]INFO EXTRACTOR, OBEYFORM
RDF produces the following output, based on the configuration used in the previous example:
SET EXTRACTOR ATINDEX 2
SET EXTRACTOR CPUS 2:1
SET EXTRACTOR PRIORITY 165
SET EXTRACTOR PROCESS $EXT2
RDFCOM Commands 209