Where Issued; Security Restrictions; Rdf State Requirements; Usage Guidelines - HP NonStop RDF J-series RVUs Management Manual

RECEIVER
displays the current configuration parameter values for the receiver process.
IMAGETRAIL
displays the current configuration parameter values for the image trail.
PURGER
displays the current configuration parameter values for the purger process.
RDFNET
displays the current configuration parameter values for the RDFNET process.
NETWORK
displays the current configuration parameter values for an RDF network.
TRIGGER
displays the values of the TRIGGER attributes as they are currently set in memory.
VOLUME
displays the current configuration parameter values for an updater process.

Where Issued

Primary system.

Security Restrictions

None; anyone can issue the SHOW command.

RDF State Requirements

You can enter the SHOW command at any time.

Usage Guidelines

This command retrieves information from the RDF configuration memory table, which serves
as an input buffer for a subsequent ADD command.
If you have not yet issued any SET commands for the specified object, or have issued a RESET
command for it, the SHOW command displays the default option values for the object.
If you want to see what parameter values are already set in the configuration file, use the INFO
command.

Output Displayed

The parameters displayed for the RDF global options and the individual processes are explained
under the SET EXTRACTOR, SET IMAGETRAIL, SET MONITOR, SET NETWORK, SET PURGER,
SET RDF, SET RDFNET, SET RECEIVER, SET TRIGGER, and SET VOLUME command
descriptions.

Examples

Examples of several SHOW commands follow:

SHOW RDF Command

To display the global configuration parameter values specified by a series of SET RDF commands,
enter:
]SHOW RDF
In response, RDFCOM displays something like this:
RDF SOFTWARELOC $SYSTEM.RDF
RDF LOGFILE $0
RDF PRIMARYSYSTEM \RDF06
240 Entering RDFCOM Commands