HP NonStop RDF J-series RVUs Management Manual page 393

For j-series and h-series rvus
Table of Contents

Advertisement

826
Missing RDF updater CONFIG record
Cause
The RDF monitor was unable to find an updater configuration record when performing
a START RDF command.
Effect
The START operation fails and RDF shuts down.
Recovery
Use the SET and ADD commands to create one or more updater configuration
records.
827
RDF version incompatible with TMF
Cause
The RDF process is not compatible with the audit format being generated by TMF.
Effect
RDF stops.
Recovery
Restart RDF under the correct version of the operating system and/or TMF.
828
Killing backup process ...
Cause
The primary process of a process pair has detected a problem in communicating with
the backup process. An earlier message will have indicated the communications problem.
Effect
Because of the severity of the problem, the primary process attempts to stop the backup
process. If the backup process stops, the primary process then attempts to create a new backup
process.
Recovery
This is an informational message; no recovery is required.
829
An RDF takeover operation was initiated on the backup system
Cause
This message indicates that the monitor detected an RDF takeover operation was
executed on the RDF backup system.
Effect
This is a catastrophic error and will cause the RDF processes on the primary system
to stop.
Recovery
You must reinitialize RDF and you might need to synchronize your databases.
830
Warning - Network down when stopping process name
name
is the name of the RDF process that was not stopped.
Cause
The RDF monitor is attempting to stop a process on the backup node but cannot do
so because the communications lines are down.
Effect
If a STOP RDF command was being processed, the RDF monitor continues with the
shutdown, and all processes on the primary system will stop. The backup processes will remain
running.
Recovery
To stop the RDF processes on the backup system, you must run RDFCOM on the
backup system and issue a second STOP RDF command.
Once all processes have stopped, RDF can be restarted when the network is restored.
831
RDF fatal error information text
text
is the stack trace.
Cause
An RDF process is terminating abnormally.
RDF Messages
393

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nonstop rdf h-series rvusNonstop rdf

Table of Contents