Show Cli Usage Online Help - HP BL680c - ProLiant - G5 User Manual

>vcem list
If the CLI List Job Details command is successful, the exit code from the CLI is zero, and the following
example output appears (through stdout) on the screen.
>vcem –list –details –job 1
Listing details for specified VCEM Job...
Job Number: 1
Job Type: MDM
Job State: COMPLETED
Job Progress: % Complete, Time, Possible Error Msg, Possible Detailed Error Msg
Job Priority: 5
Job User Name: "MachineUserNameHere"
Job Create Time: 1:58:34 PM
Job Start Time: 1:58:34 PM
Job End Time: 1:58:42 PM
In the preceding example, the job dtate status shows as completed. Valid values for this status are:
Unknown
Pending
Running
Completed
Failed
Canceled
If the CLI List Job Details command has failed, the exit code is some value greater than zero and the
associated error message appears. The following shows some output examples.
Listing details for specified VCEM Job...
ERROR (63) - Specified VCEM Job Number is not an integer
Listing details for specified VCEM Job...
ERROR (64) - Could not list details for job
Internal VCEM Error Code: 5014
Internal VCEM Error Message: No Job is found. Verify that the specified Job ID must be bigger than 0 and valid.

Show CLI usage online help

This CLI command can be used to display brief usage help on the screen.
>vcem -help
Several CLI option keywords provide for abbreviated alternatives – that is, {-failover | -fo}.
VCEM (Virtual Connect Enterprise Manager) CLI Usage:
- Perform VC Profile Failover on specified VC Domain Bay Server
>vcem {-failover | -fo} {-bay "EnclosureName:BayNumber" | -host "BayServerHostName" | -ip "BayServerIPAddress"}
- Listing details for specified VCEM Job
>vcem {-list | -ls} {-details | -dt} -job "jobNumber"
- Show CLI Help
>vcem {-help | -h}
84 Command Line Interface usage in VCEM
details job JobNumber