Window Appearance; Do Not Show Splash Screen; Show Window Full Screen; Show Window Minimized - HP T5145 - Thin Client - Tower User Manual

Window Appearance

Do Not Show
Splash Screen
Show Window Full
Screen
Show Window
Minimized
Show Window
Maximized
Set Window
Position

Set Window Size

Command Line: -spl
This prevents the initial splash screen from being displayed when
TeemTalk is started.
Command Line: +wfs
This will cause the emulation workspace to fill the screen. Note that
this also removes the window frame, soft buttons, menu and
configuration bars.
Command Line: +wmn
This will cause the TeemTalk window to be minimized on startup.
Command Line: +wmx
This will cause the TeemTalk window to be maximized on startup.
Command Line: +posleft,down
This specifies the position of the top left corner of the TeemTalk
window relative to the top left corner of the display. The numeric
value of left and down (separated by a comma) specifies the number
of pixels. For example, to position the window 200 pixels from the
left edge of the display and 100 pixels down, you would use the
following entry: +pos200,100.
Command Line: +sizwidth,depth
This specifies the size of the TeemTalk window. The numeric value
of width and depth (separated by a comma) specifies the number of
pixels. For example, to specify a window size of 1280 by 1024
pixels you would use the following entry: +siz1280,1024.
Command Line Options
Window Appearance 279