HP NonStop RDF J-series RVUs Management Manual page 434

Recovery
master subsystem, then do not add any further network records. If the network record you
have previously added does not pertains to the RDF network master subsystem, then you
need to purge your current configuration, reinitialize, and reconfigure.
Only the SUPER group can execute this command
Cause
You issued a command restricted to members of the super-user group, but your logon
ID does not indicate that group.
Effect The command fails.
Recovery
issue the command for you.
Open error error# on filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the TMF Master Audit Trail (MAT).
Cause An open error occurred on the TMF Master Audit Trail (MAT).
Effect
The file is not opened.
Recovery
recovery actions for the file-system error. Correct the error indicated by error#, then reenter
the command.
Open error error# on MAPLOG file filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the updater maplog specified in the updater configuration.
Cause
RDFCOM was not able to open the updater maplog when an ADD VOLUME, ALTER
VOLUME, START RDF, or START UPDATE command was being executed.
Effect The command fails.
Recovery
recovery actions for the file-system error. Correct the error indicated by error#, then reenter
the command.
Operation can only be performed on the BACKUPSYSTEM \backup
backup
is the name of the backup node that can perform the operation.
Cause
The command can be issued only at the backup system.
Effect
The command fails.
Recovery
Operation can only be performed on the PRIMARYSYSTEM \primary
primary
is the name of the primary node that can perform the operation.
Cause The command can be issued only at the primary node.
Effect The command fails.
Recovery
Operation is NOT allowed when RDF is running
Cause
The command is not allowed while RDF is running.
434 Messages
If the network record you have previously added pertains to the RDF network
Select another command, or ask an authorized person in the super-user group to
See the Guardian Procedure Errors and Messages Manual for a description of the
See the Guardian Procedure Errors and Messages Manual for a description of the
Enter another command.
Enter another command.