HP NonStop RDF J-series RVUs Management Manual page 457

For j-series and h-series rvus
Table of Contents

Advertisement

procname
is the RDF process without a backup CPU, which is one of: EXTRACTOR, MONITOR,
RECEIVER, or $volume UPDATER.
Cause
RDF is started without a backup process for the process identified in this message.
Effect
RDF is started.
Recovery
Stop RDF, reconfigure it to include a backup CPU for the RDF process, and start
the subsystem once again.
* * * WARNING * * * NSA SQL DDL operation encountered in the audit
trail. If you have already performed this DDL operation on the backup
database, you should initialize RDF to a later point in the audit trail.
Cause
You tried to initialize RDF to a timestamp, and RDFCOM encountered an audit record
indicating that you previously performed a SQL shared-access DDL operation.
Effect
The operation completes.
Recovery
This is an informational message. If you already performed the SQL DDL operation
manually on the backup system, then you must reinitialize RDF to a later point in time. Failure
to do so could cause a cascade of errors by RDF updaters after you start RDF.
WARNING - PRIMARYSWAP parameter has no effect, KMSF swap volume takes
precedence
Cause
The user attempted to SET or ALTER the RDF PRIMARYSWAP parameter.
Effect
This parameter no longer has any effect. The KMSF subsystem controls the placement
of the RDF processes' swap files.
Recovery
This is an informational message; no recovery is required.
* * * WARNING * * * RDF will start at the first record in the TMF master
audit trail beyond the specified shutdown timestamp. RDF will ignore
all audit generated before this timestamp.
Cause
You entered an INITIALIZE RDF command that attempted to initialize RDF at a
specific TMF shutdown timestamp.
Effect
RDF is ready to start reading the Master Audit Trail (MAT).
Recovery
This is an informational message; no recovery is required.
* * * WARNING * * * RDF will start at the first record in the TMF master
audit trail whose timestamp is less than the specified timestamp. The
timestamp you specified must follow the documented guidelines.
Cause
You are attempting to initialize RDF in conjunction with a complete database
synchronization.
Effect
If an audit record can be found whose timestamp is less than the specified timestamp,
RDF is initialized to that record.
Recovery
This is an informational message; no recovery is required.
* * * WARNING * * * RDF will start at the first record in the TMF master
audit trail whose timestamp is less than the specified timestamp. The
timestamp you specified must follow the documented guidelines. Please
note that RDFCOM will subtract an additional three minutes from the
specified timestamp to ensure a safe restart position.
Cause
You are attempting to initialize RDF to a timestamp that is earlier than the current
time, and database synchronization is not involved.
Effect
If an audit record can be found whose timestamp is less than the specified timestamp,
RDF is initialized to that record. If you were running RDF prior to this initialization command,
you should take into consideration the highest updater RTD. In addition, RDFCOM subtracts
RDFCOM Messages
457

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nonstop rdf h-series rvusNonstop rdf

Table of Contents