Output Displayed; Examples; Info * Command - HP NonStop RDF J-series RVUs Management Manual

Output Displayed

The parameters displayed for the RDF global options, secondary image trails, and the individual
processes are explained under the SET IMAGETRAIL, SET RDF, SET MONITOR, SET
EXTRACTOR, SET RECEIVER, SET RDFNET, SET NETWORK, SET PURGER, and SET VOLUME
command descriptions.

Examples

Examples of several INFO commands follow.

INFO * Command

To display all current RDF configuration parameters for both the primary and backup systems,
enter:
]INFO *
RDF displays the currently configured RDF parameter values in the following manner:
RDF SOFTWARELOC $SYSTEM.RDF
RDF BACKUPSYSTEM \TORONTO
RDF CONTROL SUBVOLUME SANFRAN
RDF LOGFILE $0
RDF PRIMARYSYSTEM \SANFRAN
RDF UPDATERDELAY 10
RDF UPDATERTXTIME 10
RDF UPDATERRTDWARNING 60
RDF UPDATEROPEN PROTECTED
RDF NETWORK OFF
RDF NETWORKMASTER OFF
RDF UPDATEREXCEPTION OFF
RDF REPLICATEPURGE
MONITOR CPUS 1:2
MONITOR PRIORITY 165
MONITOR PROCESS $MON1
EXTRACTOR ATINDEX 0
EXTRACTOR CPUS 2:1
EXTRACTOR PRIORITY 165
EXTRACTOR PROCESS $EXT
EXTRACTOR RTDWARNING 60
PURGER CPUS 3:2
PURGER PRIORITY 165
PURGER PROCESS $PURG
PURGER RETAINCOUNT 50
PURGER PURGETIME 60
RECEIVER ATINDEX 0
RECEIVER CPUS 1:2
RECEIVER EXTENTS (1000,1000)
RECEIVER PRIORITY 165
RECEIVER RDFVOLUME $DATA2
RECEIVER FASTUPDATEMODE OFF
RECEIVER PROCESS $RECV
IMAGETRAIL ATINDEX 0
IMAGETRAIL $SECIT1
IMAGETRAIL ATINDEX 0
IMAGETRAIL $SECIT2
VOLUME $DATA01
VOLUME ATINDEX 0
208 Entering RDFCOM Commands
OFF