HP NonStop RDF J-series RVUs Management Manual page 391

error
is a file-system error number.
filename
is the name of the image file associated with the error.
Cause The receiver or purger process has encountered an error while attempting to perform
a setmode operation on the specified file.
Effect
The process abends.
Recovery
Correct the problem that led to the error and restart RDF.
817
Shutting down in response to STOP UPDATE
Cause The operator issued a STOP UPDATE command, and the updater is stopping normally.
This message is issued only by updater processes.
Effect
The updater stops.
Recovery
This is an informational message; no recovery is required.
818
SQL DDL operation aborting database synchronization
Cause
While working on an online database synchronization operation, the extractor has
encountered an RDF-Stop-Updater audit record. This record indicates that an SQL DDL
operation with SHARED ACCESS altered the database on the primary system.
Effect
This SQL DDL operation has altered the primary database from what was being
duplicated to the backup system, thereby invalidating the online synchronization operation.
The extractor abends.
Recovery
You must initialize RDF to a new database synchronization timestamp and then
restart the entire operation from the beginning.
819
RDF extractor stopped unexpectedly, extractor
extractor
is the name of the extractor process that stopped.
Cause
The extractor has stopped unexpectedly. The message includes the name of the stopped
process. The message might be expected during ZLT processing, depending on the timing
conditions.
Effect
This message is issued by the RDF monitor. The monitor sends an abort request to all
remaining RDF processes to stop RDF.
Recovery A subsequent warm start of RDF might be possible, but the success of the restart
depends on the nature of the failure that caused the original process to stop. If the message is
issued during ZLT processing, no recovery is required.
820
RDF receiver stopped unexpectedly, receiver
receiver
is the name of the receiver process that stopped.
Cause The receiver has stopped unexpectedly. The message includes the name of the stopped
process.
Effect This message is issued by the RDF monitor. The monitor sends an abort request to all
remaining RDF processes to stop RDF.
Recovery
A subsequent warm start of RDF might be possible, but the success of the restart
depends on the nature of the failure that caused the original process to stop.
RDF Messages 391