HP NonStop RDF J-series RVUs Management Manual page 430

Cause RDFCOM expected * in the filename portion of the subvolume indicated by
subvolume-name when an ADD VOLUME, ALTER VOLUME, START RDF, START UPDATE,
or VALIDATE CONFIGURATION command was being executed.
Effect
The command fails.
Recovery
Mapping string mapping-string is invalid in the MAPFILE filename, error
error#
mapping-string
is the erroneous mapping string specified in the mapfile.
filename
is the name of the updater mapfile specified in the updater configuration.
error#
is the file-system error number that identifies the specific error.
Cause
RDFCOM found that the mapping string specified in the updater mapfile is invalid
when an ADD VOLUME, ALTER VOLUME, START RDF, START UPDATE, or VALIDATE
CONFIGURATION command was being executed.
Effect
The command fails.
Recovery
actions for the file-system error. Correct the error indicated by error#, then, reenter the
command.
Mapping string mapping-string is invalid in the MAPFILE filename
The subvolume subvolume-name is invalid.
mapping-string
is the erroneous mapping string specified in the MAPFILE.
filename
is the name of the updater MAPFILE specified in the updater configuration.
subvolume-name
is the erroneous subvolume specified in the mapping string.
Cause RDFCOM detected that the subvolume indicated by subvolume-name is invalid
when an ADD VOLUME, ALTER VOLUME, START RDF, START UPDATE, or VALIDATE
CONFIGURATION command was being executed.
Effect The command fails.
Recovery
Mapping string mapping-string is invalid at position index in the MAPFILE
filename
mapping-string
is the erroneous mapping string specified in the MAPFILE.
index
is the erroneous position in the mapping string.
filename
is the name of the updater MAPFILE specified in the updater configuration.
Cause RDFCOM detected that the mapping string is invalid at the position indicated by
index when an ADD VOLUME, ALTER VOLUME, START RDF, START UPDATE, or
VALIDATE CONFIGURATION command was being executed.
Effect
The command fails.
Recovery
Master EXTRACTOR Record already exists
430 Messages
Correct the mapping string, then reenter the command.
See the Guardian Procedure Errors and Messages Manual for a description and recovery
Correct the mapping string, then reenter the command.
Correct the mapping string, then reenter the command.