New In This Release; Call Home; Zoning Configuration Parameters; Set Port Command Changes - Qlogic SANbox 5000 Series Interface Manual

A
1.4

New in This Release

The following features are new in this release.

Call Home

Zoning Configuration Parameters

Set Port Command Changes

1.4.1
Call Home
This feature improves fabric availability by notifying adminstrators by email of
events that afffect switch operation. The following commands have been modified:
Set Setup Services
Show Setup Services
Set Log
Show Log
The following commands have been added:
Callhome
Profile
Set Setup Callhome
Show Setup Callhome
1.4.2
Zoning Configuration Parameters
The following zoning configuration parameters have changed:
InteropAutoSave is now named MergeAutoSave; function is the same.
DefaultZone values have changed from True/False to Allow/Deny; function
is the same.
1.4.3
Set Port Command Changes
The Set Port command keywords Bypass and Enable have been removed.
59183-02 A
1 – Introduction
New in This Release
1-3