Introduction; Intended Audience; Related Materials; New In This Release - Qlogic SANbox 9000 Series Interface Manual

1 – Introduction

Intended Audience

1.1
Intended Audience
This guide is intended for individuals who are responsible for installing and
servicing Fibre Channel equipment using the command line interface.
1.2

Related Materials

The following manuals and materials are referenced in the text and/or provide
additional information.
SANbox 9000 Series Stackable Chassis Switch Installation Guide, 59229-03
SANbox 9000 Series QuickTools Switch Management User Guide,
59234-03
SANbox 9000 Series Enterprise Fabric Suite 2007 User Guide, 59230-03
QLogic Fibre Channel Switch Event Message Guide, publication number
59060-04
SANbox Simple Network Management Protocol Reference Guide,
publication number, 59047-08
CIM Agent Reference Guide, 59223-01
QLogic Switch Interoperability Guide v3.0. This PDF document can be
downloaded at http://www.qlogic.com/interopguide/info.asp#inter.
Fibre Channel-Arbitrated Loop (FC-AL-2) Rev. 7.0.
Fibre Channel-10-bit Interface Rev. 2.3.
Definitions of Managed Objects for the Fabric Element in Fibre Channel
Standard (draft-ietf-ipfc-fabric-element-mib-04.txt).
The Fibre Channel Standards are available from:
Global Engineering Documents, 15 Inverness Way East, Englewood, CO
80112-5776 Phone: (800) 854-7179 or (303) 397-7956
Fax: (303) 397-2740.
1.3

New in This Release

The following features are new in this release.
Call Home

Zoning Configuration Parameters

Fault Monitoring and Reporting
Set Port Command Changes
1-2
S
59231-03 A