Qlogic SANbox 5000 Series Interface Manual page 79

A
Enter the
members in the active zone set and configured zone sets as shown in the
following example. Merged and edited zone sets are displayed if they exist.
SANbox #> zoning list
Active (enforced) ZoneSet Information
ZoneSet
--------------------------------
wwn
Configured (saved in NVRAM) Zoning Information
ZoneSet
--------------------------------
wwn
59183-02 A
Zoning List command to display all zone sets, zones, and zone
Zone ZoneMember
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:c3
Zone ZoneMember
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:16
7 – Zoning Configuration
Displaying Zoning Database Information
7-3