Related Materials; New In This Release - Qlogic SANbox 5602 Installation Manual

1 – Introduction

Related Materials

1.2
Related Materials
The following manuals and materials are referenced in the text and/or provide
additional information.
SANbox 5602 Switch Management User's Guide, publication number
59097-01.
QLogic Switch Interoperability Guide v3.0. This PDF document can be
downloaded at http://www.qlogic.com/interopguide/info.asp#inter.
Fibre Channel-Arbitrated Loop (FC-AL-2) Rev. 6.8.
Fibre Channel-10-bit Interface Rev. 2.3.
Definitions of Managed Objects for the Fabric Element in Fibre Channel
Standard (draft-ietf-ipfc-fabric-element-mib-04.txt).
The Fibre Channel Standards are available from:
Global Engineering Documents, 15 Inverness Way East, Englewood, CO
80112-5776 Phone: (800) 854-7179 or (303) 397-7956
Fax: (303) 397-2740.
1.3

New in this Release

The following items are new in the current firmware release:
Support for FC-SP device security for authorization and authentication.
Support for centralized device and user authentication on a Remote
Authentication Dial-In User Service (RADIUS) server.
Support for secure workstation connections to the switch using the Secure
Shell (SSH) protocol for the Telnet command line interface and the Secure
Socket Layer protocol for management applications such as SANsurfer
Switch Manager.
Support for transmission of service indications to Common Information
Module (CIM) clients through the configuration of listeners and
subscriptions.
Support for centralized control of switch services: Telnet, Secure Shell
(SSH) connections, SANsurfer Switch Manager, Secure Socket Layer (SSL)
connections, Simple Network Management Protocol (SNMP), Network Time
Protocol (NTP), File Transfer Protocol (FTP), Common Information Module
(CIM), and management server.
Maximum number of zones is increased to 2000.
Time zone can be set to synchronize the switch and workstation.
Support for SANsurfer Switch Manager on MacIntosh and S.u.S.E Linux
operating systems.
1-2
0
59096-01 A