Table of Contents
Advertisement
0
1.3
New in this Release
The following items are new in the current firmware release:
Support for FC-SP device security for authorization and authentication.
Support for centralized device and user authentication on a Remote
Authentication Dial-In User Service (RADIUS) server.
Support for secure workstation connections to the switch using the Secure
Shell (SSH) protocol for the Telnet command line interface and the Secure
Socket Layer protocol for management applications such as SANsurfer
Switch Manager.
Support for transmission of service indications to Common Information
Module (CIM) clients through the configuration of listeners and
subscriptions.
Support for centralized control of switch services: Telnet, Secure Shell
(SSH) connections, SANsurfer Switch Manager, Secure Socket Layer (SSL)
connections, Simple Network Management Protocol (SNMP), Network Time
Protocol (NTP), File Transfer Protocol (FTP), Common Information Module
(CIM), and management server.
Centralized control of switch services: Telnet, SANsurfer Switch Manager,
Simple Network Management Protocol (SNMP), Network Time Protocol
(NTP), File Transfer Protocol (FTP), Common Information Module (CIM),
and management server.
Maximum number of zones is increased to 2000.
Time zone can be set to synchronize the switch and workstation.
Support for SANsurfer Switch Manager on MacIntosh and S.u.S.E Linux
operating systems.
59042-08 A
1 – Introduction
New in this Release
1-3
Advertisement
Table of Contents
