Show Port Parameters - Qlogic SANbox 5000 Series Interface Manual

14 – Command Reference
Show Port
Show Port
Displays operational information for one or more ports.
Authority
None
Syntax
show port
[port_list]
Keywords
[port_list]
The number of the port for which to display information. [port_list] can be a set of
port numbers and ranges delimited by spaces. For example, [0 2 10-15] specifies
ports 0, 2, 10, 11, 12, 13, 14, and 15.
Notes
Table 14-30
AdminState
AIinit
AIinitError
AsicNumber
AsicPort
Bad Frames
BBCR_FrameFailures
BBCR_RRDYFailures
ClassXFramesIn
ClassXFramesOut
ClassXWordsIn
ClassXWordsOut
ClassXToss
ConfigType
14-142
describes the port parameters.
Table 14-30. Show Port Parameters
Entry
Administrative state
Incremented each time the port begins AL initialization.
Number of times the port entered initialization and the initial-
ization failed.
ASIC number
ASIC port number
Number of frames that have framing errors.
Number of times more frames were lost during a credit recov-
ery period than the recovery process could resolve. This
causes a Link Reset to recover the credits.
Number of times more R_RDYs were lost during a credit
recovery period than the recovery process could resolve. This
causes a Link Reset to recover the credits.
Number of class x frames received by this port.
Number of class x frames sent by this port.
Number of class x words received by this port.
Number of class x words sent by this port.
Number of times an SOFi3 or SOFn3 frame is tossed from
TBUF.
Configured port type
Description
S
59183-02 A