Qlogic SANbox 5000 Series Interface Manual page 195

A
The following is an example of the Profile Edit command:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> profile edit profile_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
Level
Format
MaxSize
EmailSubject
RecipientEmail
1. john.smith@domain.com
New Value (press ENTER to accept current value, 'q' to quit):
Level
Format
MaxSize
EmailSubject
RecipientEmail
1. john.smith@domain.com
2. <undefined>
The profile has been edited.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
SANbox (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
59183-02 A
Alarm
ShortText
1000
Switch Problem
(up to 10 entries allowed)
(Alarm,Critical,Warn,None)
(1=FullText, 2=ShortText)
(decimal value, 650-100000)
(string, max=64 chars, N=None)
(ex: admin@company.com, N=None)
14 – Command Reference
:
: 1
:
:
:
:
Profile
14-49