Qlogic SANbox 5000 Series Interface Manual page 264

14 – Command Reference
Show Config Security Portbinding
Show Config Security Portbinding
Displays the port binding configuration for one or more ports.
Authority
None
Syntax
show config security portbinding [port_number]
Keywords
[port_number]
The number of the port. If you omit [port_number], the port binding configuration
for all ports is displayed.
Examples
The following is an example of the Show Config Security Port command:
SANbox #> show config security portbinding
Configuration Name: default
-------------------
Port
----
0
1
2
3
4
5
6
7
8
14-118
Binding Status WWN
-------------- -----------------------
Enabled 10:20:30:40:50:60:70:80
Enabled 10:20:30:40:50:60:70:80
Disabled 10:20:30:40:50:60:70:80
Enabled 10:20:30:40:50:60:70:80
Enabled 10:20:30:40:50:60:70:80
Disabled 10:20:30:40:50:60:70:80
Enabled 10:20:30:40:50:60:70:81
Disabled 10:20:30:40:50:60:70:82
Enabled 10:20:30:40:50:60:70:80
S
59183-02 A