Call Home Service Configuration Settings - Qlogic SANbox 5000 Series Interface Manual

14 – Command Reference
Set Setup Callhome
Set Setup Callhome
Configures the Call Home database for managing email notifications of fabric
problems.
Authority
Admin session
Syntax
set setup callhome
Prompts you in a line-by-line fashion to configure the Call Home database.
Table 14-23
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnabled
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEnabled
ContactEmailAddress
PhoneNumber
StreetAddress
14-94
describes the Call Home configuration fields.
Table 14-22. Call Home Service Configuration Settings
Entry Description
IP address of the primary SMTP server. The
default is 0.0.0.0.
Service port number that the primary SMTP
server is monitoring for SMTP agents. The default
is 25.
Enables (True) or disables (False) the primary
SMTP server. The default is False.
IP address of the secondary SMTP server. The
default is 0.0.0.0.
Service port number that the secondary SMTP
server is monitoring for SMTP agents. The default
is 25.
Enable (True) or disable (False) the secondary
SMTP server. The default is False.
Email address of the person to be notified to
respond to the email message. The format is
account@domain. This information is included in
the email message when the profile format is Full-
Text.
Contact phone number to be included in the email
message text. This information is included in the
email message when the profile format is FullText.
Contact street address to be included in the email
message text. This information is included in the
email message when the profile format is FullText.
S
59183-02 A