Transceiver Information - Qlogic SANbox 5000 Series Interface Manual

6 – Port Configuration
Displaying Port Information
6.1.5

Transceiver Information

NOTE:
The Show Media command requires the SANdoctor license key. To
purchase a license key, contact your authorized maintenance provider or
authorized reseller.
Enter the
more transceivers as shown in the following example. Refer to
description of the transceiver information in the Show Media display.
SANbox #> show media 4
Port Number: 4
-------------
MediaType
MediaVendor
MediaPartNumber
MediaRevision
MediaSerialNumber
MediaSpeeds
6-6
Show Media command to display operational information about one or
400-M5-SN-I
FINISAR CORP.
FTRJ8524P2BNL
A
P6G22RL
1Gb/s, 2Gb/s, 4Gb/s
Temp
(C)
----------- ----------- ------------ ----------- -----------
Value 37.32
Status Normal HighWarning
HighAlarm 95.00
HighWarning 90.00
LowWarning -20.00
LowAlarm -25.00
Voltage Tx Bias
(V) (mA)
3.33 7.30
Normal
3.90 17.00
3.70 14.00
2.90 2.00
2.70 1.00
S
Table 14-29 for a
Tx Pwr Rx Pwr
(mW) (mW)
0.373 0.000
Normal LowAlarm
0.637 1.264
0.637 0.791
0.082 0.028
0.073 0.019
59183-02 A