Set Alarm - Qlogic SANbox 5000 Series Interface Manual

14 – Command Reference

Set Alarm

Set Alarm
Controls the display of alarms in the session output stream or clears the alarm log.
Authority
Admin session for the Clear keyword. Otherwise, none.
Syntax
set alarm [option]
Keywords
[option]
[option] can be one of the following:
clear
Clears the alarm log history. This value requires an Admin session.
on
Enables the display of alarms in the session output stream.
off
Disables the display of alarms in the session output stream. Disabling the
display of alarms in the output stream allows command scripts to run without
interruption.
Examples
The following is an example of the Set Alarm command:
SANbox #> set alarm on
14-70
S
59183-02 A